Configuring And Viewing Device Slot Information; Configuration; Figure 51: Card Configuration; Table 41: Card Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
C
ONFIGURING AND
The pages in the Slot folder provide information about the cards installed in the slots on the switch. The physical location of
the slots depends on the hardware on which D-Link software is running. From the Configuration page, you can also manually
configure information about cards on some platforms.
C
ONFIGURATION
Use the Card Configuration page to view information about the cards installed in a switch. On some platforms, you can
manually configure information about slots.
To access the Card Configuration page, click LAN > Administration > Card Configuration in the navigation menu.
Figure 51 shows the fields that display when the slot contains a card.
Field
Unit
Slot
Slot Status
Admin State
Power State
Card Type
Page 106

Configuring and Viewing Device Slot Information

V D
IEWING EVICE

Figure 51: Card Configuration

Table 41: Card Configuration Fields

Description
Indicates the unit in the stack for which data is to be displayed or configured.
Indicates the slot in the selected unit for which data is to be displayed or configured.
Indicates whether a card is in the slot (Full or Empty).
Displays whether the slot is administratively enabled or disabled. This field is non-
configurable for read-only users.
Displays whether the slot is powered on of off. This field is non-configurable for read-
only users.
Displays a list of possible supported card types which can be plugged into the slot. This
is visible only for slots which do not have any cards plugged into them and which have
not already been pre-configured. This field is not visible to read-only users.
S I
LOT NFORMATION
Document 34CSFP6XXUWS-SWUM100-D7
Software User Manual
12/10/09