Server Configuration; Dns Host Name Ip Mapping Configuration; Figure 92: Dns Server Configuration; Table 77: Dns Server Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
add multiple domains to the default domain list.
• To remove a domain from the default list select the Remove option next to the item you want to remove and click
Submit.
S C
ERVER ONFIGURATION
Use this page to configure information about DNS servers that the router will use. The order in which you create them
determines their precedence; i.e., DNS requests will go to the higher precedence server first. If that server is unavailable or
does not respond in the configured response time, then the request goes to the server with the next highest precedence.
To access this page, click LAN > Administration >DNS Client > Server Configuration.
Field
DNS Server Address
Precedence
• To create a new DNS server, enter an IP address in standard IPv4 or IPv6 dot notation in the DNS Server Address and
click Submit. The server appears in the list below. The precedence is set in the order created.
• To change precedence, you must remove the server(s) by clicking the Remove box and then Submit, and add the
server(s) in the preferred order.
DNS H N IP M
OST AME
Use this page to configure DNS host names for hosts on the network. The host names are associated with IPv4 or IPv6
addresses on the network, which are statically assigned to particular hosts.
To access this page, click LAN > Administration > DNS Client > HostName IP Mapping in the navigation tree, then click
the Add Static Entry button.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 92: DNS Server Configuration

Table 77: DNS Server Configuration Fields

Description
To add a new DNS server to the list, enter the DNS server IPv4 or IPv6 address in
numeric notation.
Shows the precedence value of the server that determines which server is contacted
first; a lower number indicates has higher precedence.
C
APPING ONFIGURATION
D-Link Unified Access System
Configuring DNS Page 163