Creating An Authentication List; Configuring An Authentication List; Deleting An Authentication List - D-Link DWS-4026 User Manual

D-Link Unified Access System

Creating an Authentication List

To create a new authentication list, use the following procedures.
1 Select Create from the Authentication List field.
2 In the Authentication List Name field, enter a name of 1 to 12 characters.
The name cannot include spaces.
3 Click Submit to create the name and display the Method fields for the new list.
You are now ready to configure the authentication list. By default, local is set as the initial authentication method.
To retain the changes across a power cycle, you must perform a save.

Configuring an Authentication List

To modify an authentication list, use the following procedures.
1 Select an existing list from the Authentication List menu.
2 From the Method 1 field, select the initial login method.
3 If desired, select the second and third login method from the Method 2 and Method 3 fields.
4 Click Submit to apply the changes to the system.
To retain the changes across a power cycle, you must perform a save.

Deleting an Authentication List

Use the following procedures to remove an authentication login list from the configuration.
1 Select an existing list from the Authentication List menu.
2 Click Delete.
The delete will fail if the selected login list is assigned to any user (including the default user) for system login or IEEE
802.1X port access control. You can only use this button if you have Read/Write access.
To retain the changes across a power cycle, you must perform a save.
Page 74 Authentication List Configuration
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09