D-Link DWS-4026 User Manual page 543

Software User Manual
12/10/09
a. Select MST 10 from the MST menu.
b. Enter 16384 in the Bridge Priority field.
c. Click VLAN 10 to select it from the VLAN ID field.
d. Click Submit.
6 Use similar procedures to associate MST instance 20 to VLAN 20 and assign it a bridge priority value of 61440.
By using a lower priority for MST 20, MST 10 becomes the root bridge.
7 Enable STP on port 0/1.
a. Go to the LAN > Administration > Port Configuration > Port Configuration page.
b. From the Slot/Portt mode, select port 0/1.
c. From the STP Mode menu, select Enable.
d. Click Submit.
Document 34CSFP6XXUWS-SWUM100-D7
D-Link Unified Access System
Configuring Multiple Spanning Tree Protocol Page 543