Figure 13: Poe Configuration; Table 8: Poe Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
To access the PoE Configuration page, click LAN > Administration > PoE Configuration in the navigation menu.
The following figure shows the fields that display.
Field
System Usage Threshold
Slot/Port
Admin Mode
Priority
Power Limit
• If you make any changes to the page, click Submit to apply the changes to the system.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 13: PoE Configuration

Table 8: PoE Configuration Fields

Description
Sets threshold level at which a trap is sent if the total power consumed is greater than
or equal to the specified percentage of total power available.
Select the slot and port with the information to configure.
Enables or disables the ability of the port to deliver power.
The switch may not be able to supply power to all connected devices. So, priority is
used to determine which ports can supply power. For ports with the same priority, the
lower numbered port will have a higher priority.
Defines the maximum power which can be delivered by a port.
D-Link Unified Access System
PoE Configuration Page 63