Poe Configuration; Figure 12: Card Configuration; Table 7: Card Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Slot
Slot Status
Admin State
Power State
Card Type
Inserted Card Model
Inserted Card Description
Configured Card Model
Configured Card Description
Pluggable
Power Down
• If you make any changes to the page, click Submit to apply the changes to the system.
P E C
O ONFIGURATION
Use the PoE Configuration page to configure the Power over Ethernet (PoE) features.
Page 62

PoE Configuration

Figure 12: Card Configuration

Table 7: Card Configuration Fields

Description
Indicates the slot in the selected unit for which data is to be displayed.
Indicates whether a card is in the slot (Full or Empty).
Displays whether the slot is administratively enabled or disabled. This field is non-
configurable for read-only users.
Displays whether the slot is powered on of off. This field is non-configurable for read-
only users.
Displays a list of possible supported card types which can be plugged into the slot. This
is visible only for slots which do not have any cards plugged into them and which have
not already been pre-configured. This field is not visible to read-only users.
Displays the model identifier of the card plugged into the selected slot. If no card has
been plugged in, this field is not shown.
Displays the description of the card plugged into the selected slot. If no card has been
plugged in, this field is not shown.
Displays the model identifier of the card pre-configured for the selected slot. If no card
has been pre-configured, this field is not shown.
Displays the model identifier of the card pre-configured for the selected slot. If no card
has been pre-configured, this field is not shown.
Displays the pluggable indicator of the specified slot.
Displays the power down indicator of the specified slot.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09