Viewing The Ap Hardware Capability List; Table 278: Peer Switch Configuration - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Current Receive Status
Peer Switch IP Address
Configuration
Timestamp

Viewing the AP Hardware Capability List

The switch can support APs that have different hardware capabilities, such as the supported number of radios, the supported
IEEE 802.11 modes, and the software image required by the AP. From the AP Hardware Capability tab, you can access
summary information about the AP Hardware support, the radios and IEEE modes supported by the hardware, and the
software images that are available for download to the APs.
Page 458 Monitoring Status and Statistics

Table 278: Peer Switch Configuration

Description
Indicates the global status when wireless configuration is received from a peer switch. The
possible status values are as follows:
• Not Started
• Receiving Configuration
• Saving Configuration,
• Applying AP Profile Configuration
• Success
• Failure - Invalid Code Version
• Failure - Invalid Hardware Version
• Failure - Invalid Configuration
Last Configuration Received
Indicates the last switch from which this switch received any wireless configuration data.
Indicates which portions of configuration were last received from a peer switch, which can be
one or more of the following:
• Global
• Discovery
• Channel/Power
• AP Database
• AP Profiles
• Known Client
• Captive Portal
• RADIUS Client
• QoS ACL
• QoS DiffServ
If the switch has not received any configuration for another switch, the value is None.
Indicates the last time this switch received any configuration data from a peer switch.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09