Table 175: Arp Table Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Active Static Entries
Configured Static Entries
Maximum Static Entries
Remove from Table
Remove IP Address
The ARP Table displays at the bottom of the page, and contains the following fields:
Field Description
IP Address The IP address of a device on a subnet attached to one of the switch's routing interfaces.
MAC Address The unicast MAC address for the device. The format is six two-digit hexadecimal numbers separated
by colons, for example 00:06:29:32:81:40.
Slot/Port The routing interface associated with the ARP entry.
Type The type of the ARP entry.
Age Age since the entry was last refreshed in the ARP Table. The format is hh:mm:ss
• If you make any changes to the page, click Submit to apply the changes to the system.
Page 282 Configuring ARP
Table 174: ARP Table Configuration Fields (Cont.)
Description
Total number of active static entries in the ARP table.
Total number of configured static entries in the ARP table.
Maximum number of static entries that can be defined.
Allows you to remove certain entries from the ARP Table. The choices listed specify
the type of ARP Entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
• Specific Dynamic Gateway Entry
• Specific Static Entry
This field appears only if you select Specific Dynamic/Gateway Entry or Specific Static
Entry in the Remove from Table menu. This field allows you to enter the IP Address
against the entry that is to be removed from the ARP Table.

Table 175: ARP Table Fields

Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09