Managing The Dhcp Server; Global Configuration; Figure 84: Dhcp Server Global Configuration; Table 69: Dhcp Server Global Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
M
ANAGING THE
DHCP is generally used between clients (e.g., hosts) and servers (e.g., routers) for the purpose of assigning IP addresses,
gateways, and other networking definitions such as DNS, NTP, and/or SIP parameters. The DHCP Server folder contains
links to web pages that define and display DHCP parameters and data. The following pages are accessible from this DHCP
Server folder:
•

"Global Configuration"

• "Pool Configuration"
• "Pool Options"
• "Reset Configuration"
• "DHCP Server Summary"
• "Server Statistics"
• "Conflicts Information"
G C
LOBAL ONFIGURATION
Use the Global Configuration page to configure DHCP global parameters.
To display the page, click LAN > Administration > DHCP Server > Global Configuration in the navigation tree.
Field
Admin Mode
Ping Packet Count
Conflict Logging Mode
Page 152

Managing the DHCP Server

DHCP S
ERVER

Figure 84: DHCP Server Global Configuration

Table 69: DHCP Server Global Configuration Fields

Description
Enables or disables DHCP server operation on the switch. The default value is
Disable.
Specifies the number of packets a server sends to a Pool address to check for
duplication as part of a ping operation. Default value is 2. The valid range is (0, 2 to
10). Setting the value to 0 disables the function.
Specifies whether to enable or disable conflict logging on a DHCP Server. The default
value is Enable.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09