Figure 363: Peer Switch Configuration Request Status; Table 338: Peer Switch Configuration Request Status - D-Link DWS-4026 User Manual

D-Link Unified Access System
To initiate a configuration update on a specific peer switch, select the box next to the IP address of the peer switch to update,
and then click Start. To update all peer switches, click Start All.
Table 338 describes the fields on the Peer Switch Configuration Request Status page.
Field
Configuration Request Status
Total Count
Success Count
Failure Count
Peer IP Address
You can copy portions of the switch configuration from one switch to another switch in the cluster. The Peer Switch
Configuration Enable/Disable page allows you to select which parts of the configuration to copy to one or more peer
switches in the group.
Page 522 Configuring Advanced Settings

Figure 363: Peer Switch Configuration Request Status

Table 338: Peer Switch Configuration Request Status

Description
Indicates the global status for a configuration push operation to one or more
peer switches. The status can be one of the following:
• Not Started
• Receiving Configuration
• Saving Configuration
• Success
• Failure—Invalid Code Version
• Failure—Invalid Hardware Version
• Failure—Invalid Configuration
Indicates the number of peer switches included at the time a configuration
download request is started, the value is 1 if a download request is for a single
switch.
Indicates the total number of peer switches that have successfully completed
a configuration download.
Indicates the total number of peer switches that have failed to complete a
configuration download.
Lists the IP address of each switch in the cluster and indicates the
configuration request status of that switch.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09