Figure 364: Peer Switch Configuration Enable/Disable; Table 339: Peer Switch Configuration Enable/Disable - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
You can make changes to a configuration that has been sent to one or more peer switches, and you can make changes to
a configuration received from a peer switch. No changes automatically propagate from one switch to the cluster; you must
manually initiate a request on one switch in order to copy any configuration to its peers.
Table 339 shows the fields on the detail page for Peer Switch Configuration Enable/Disable page.
Field
Global
Discovery
Channel/Power
AP Database
Document 34CSFP6XXUWS-SWUM100-D7

Figure 364: Peer Switch Configuration Enable/Disable

Table 339: Peer Switch Configuration Enable/Disable

Description
Enable this field to include the basic and advanced global settings in the
configuration that the switch pushes to its peers. The configuration does not
include the switch IP address since that is a unique setting.
To view current basic global settings, click the WLAN > Administration >
Basic Setup > Global tab. To view current advanced global settings, click the
WLAN > Advanced Configuration > Global page.
Enable this field to include the L2 and L3 discovery information, including the
VLAN list and IP list, in the configuration that the switch pushes to its peers.
To view the discovery settings on the local switch, click the WLAN >
Administration > Basic Setup > Discovery tab.
Enable this field to include the RF management information in the
configuration that the switch pushes to its peers.
To view the channel and power settings on the local switch, click the WLAN
> Administration > AP Management > RF Management tab.
Enable this field to include the AP Database in the configuration that the
switch pushes to its peers.
To view the contents of the local AP Database, click the WLAN >
Administration > Basic Setup > Valid AP tab.
D-Link Unified Access System
Configuring Advanced Settings Page 523