Secure Http; Secure Http Configuration; Figure 288: Secure Http Configuration; Table 255: Secure Http Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
S HTTP
ECURE
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer (SSL) or Transport Layer Security
(TLS) connection. When you manage the switch by using a Web interface, secure HTTP can help ensure that
communication between the management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
S HTTP C
ECURE ONFIGURATION
Use the Secure HTTP Configuration page to configure the settings for HTTPS communication between the management
station and the switch.
To display the Secure HTTP Configuration page, click LAN > Security > SSL Configuration in the navigation menu.
Field
Admin Mode
TLS Version 1
SSL Version 3
HTTPS Port
HTTPS Session Soft Timeout
Page 400

Secure HTTP

Figure 288: Secure HTTP Configuration

Table 255: Secure HTTP Configuration Fields

Description
Enables or Disables the Administrative Mode of Secure HTTP. The currently
configured value is shown when the web page is displayed. The default value is
Disable. You can only download SSL certificates when the HTTPS Admin mode is
disabled.
Enables or Disables Transport Layer Security Version 1.0. The currently configured
value is shown when the web page is displayed. The default value is Enable.
Enables or Disables Secure Sockets Layer Version 3.0. The currently configured value
is shown when the web page is displayed. The default value is Enable.
Sets the HTTPS Port Number. The value must be in the range of 1 to 65535. Port 443
is the default value. The currently configured value is shown when the web page is
displayed.
Sets the inactivity timeout for HTTPS sessions. The value must be in the range of (1
to 60) minutes. The default value is 5 minutes. The currently configured value is shown
when the web page is displayed.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09