Interface Configuration; Figure 149: Mld Snooping Interface Configuration; Table 132: Mld Snooping Interface Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Table 131: MLD Snooping Global Configuration and Status Fields (Cont.)
Field
VLAN Ids Enabled For MLD
Snooping
• Select Enable or Disable the Admin Mode field and click Submit to turn the feature on or off. Perform a save if you
want the changes to remain in effect over a power cycle.
I C
NTERFACE ONFIGURATION
Use the MLD Snooping Interface Configuration page to configure snooping settings on specific interfaces.
To access the MLD Snooping Interface Configuration page, click LAN > L2 Features > MLD Snooping > Interface
Configuration in the navigation tree.
Field
Slot/Port
Admin Mode
Group Membership Interval
Max Response Time
Multicast Router Present
Expiration Time
Page 228 Configuring MLD Snooping
Description
Displays VLAN Ids enabled for MLD snooping. To enable interfaces for MLD snooping,
see "VLAN Configuration" on page

Figure 149: MLD Snooping Interface Configuration

Table 132: MLD Snooping Interface Configuration Fields

Description
Select the physical or LAG interfaces to configure.
Select the interface mode for the selected interface for MLD Snooping for the switch
from the pulldown menu. The default is Disable.
Specify the amount of time you want the switch to wait for a report for a particular group
on a particular interface before it deletes that interface from the group. The valid range
is from (2 to 3600) seconds. The default is 260 seconds.
Specify the amount of time you want the switch to wait after sending a query on an
interface because it did not receive a report for a particular group on that interface.
Enter a value greater or equal to 1 and less than the Group Membership Interval in
seconds. The default is 10 seconds. The configured value must be less than the Group
Membership Interval.
Specify the amount of time you want the switch to wait to receive a query on an
interface before removing it from the list of interfaces with multicast routers attached.
Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero
indicates an infinite timeout; i.e., no expiration.
Software User Manual
229.
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09