D-Link DWS-4026 User Manual page 136

Dws-4000 series unified wired & wireless access system
Table of Contents

Advertisement

D-Link Unified Access System
Field
Broadcast Storm Recovery
CFI Discards
Upstream Threshold
Packets Transmitted Octets
Total Packets Transmitted
(Octets)
Packets Transmitted 64 Octets The total number of packets (including bad packets) received that were 64 octets in
Packets Transmitted 65-127
Octets
Packets Transmitted 128-255
Octets
Packets Transmitted 256-511
Octets
Packets Transmitted 512-1023
Octets
Packets Transmitted 1024-
1518 Octets
Maximum Frame Size
Packets Transmitted Successfully
Total Packets Transmitted
Successfully
Unicast Packets Transmitted
Multicast Packets Transmitted
Broadcast Packets
Transmitted
Transmit Errors
Total Transmit Errors
Tx FCS Errors
Tx Oversized
Underrun Errors
Transmit Discards
Page 136
Viewing System Statistics
Table 60: Port Fields (Cont.)
Description
The number of frames discarded that are destined for FF:FF:FF:FF:FF:FF when
Broadcast Storm Recovery is enabled.
The number of frames discarded that have CFI bit set and the addresses in RIF are in
non-canonical format.
The number of frames discarded due to lack of cell descriptors available for that
packet's priority level.
The total number of octets of data (including those in bad packets) transmitted on the
network (excluding framing bits but including FCS octets). This object can be used as
a reasonable estimate of ethernet utilization. If greater precision is desired, the
etherStatsPkts and etherStatsOctets objects should be sampled before and after a
common interval.
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 128
and 255 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 256
and 511 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 512
and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 1024
and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
The maximum ethernet frame size the interface supports or is configured, including
ethernet header, CRC, and payload. (1518 to 9216). The default maximum frame size
is 1518.
The number of frames that have been transmitted by this port to its segment.
The total number of packets that higher-level protocols requested be transmitted to a
subnetwork-unicast address, including those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted to a
Multicast address, including those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not sent.
The sum of Single, Multiple, and Excessive Collisions.
The total number of packets transmitted that had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame
Check Sequence (FCS) with an integral number of octets
The total number of frames that exceeded the max permitted frame size. This counter
has a max increment rate of 815 counts per second at 10 Mb/s.
The total number of frames discarded because the transmit FIFO buffer became
empty during frame transmission.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600apDws-4000 series

Table of Contents