Software User Manual
12/10/09
Field
Port
PAE Capabilities
Click Submit to set the PAE capability. Note that these changes will not be retained across a power cycle unless you
All Applied
Changes.
If you configured a port as a supplicant, use the
parameters for the port.
S
P
C
UPPLICANT
ORT
After you have configured a port as a supplicant, use this page to configure operational properties of the port.
To access the Supplicant Port Configuration page, click LAN > Security > Port Access Control > Supplicant Port
Configuration.
Field
Port
Document
34CSFP6XXUWS-SWUM100-D7
Figure 274: PAE Capability Configuration
Table 244: PAE Capability Configuration
Description
Select the Slot/Port to configure.
Select authenticator or supplicant from the list.
"Supplicant Port Configuration"
ONFIGURATION
Figure 275: Port Access Control Supplicant Port Configuration
Table 245: Dot1x Supplicant Port Configuration
Description
Select the port to configure.
D-Link Unified Access System
page to configure additional operational
Port Access Control
Save
Page 387