Cp Configuration; Figure 251: Captive Portal Summary; Table 224: Captive Portal Summary - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
CP C
ONFIGURATION
From the CP Configuration page, you can view summary information about captive portals on the system, add a captive
portal, and configure existing captive portals.
Use the CP Summary page to create or delete captive portal configurations. The switch supports 10 CP configurations. CP
configuration 1 is created by default and can not be deleted. Each captive portal configuration can have unique guest or
group access modes and a customized acceptance use policy that displays when the client connects.
To view summary information about existing captive portals, or to add or delete a captive portal, click LAN > Security >
Captive Portal > CP Configuration.
To create a CP configuration, enter the configuration name in the text box and click Add. After you add the configuration,
the CP Configuration page for that configuration appears and a new tab with the name of that configuration is created.
To delete an existing CP, select the check box for the CP to remove, and then click Delete.
To configure the settings for an existing CP, click the name in the Configuration column or click the appropriate tab.
In this document, the names captive portal or CP or portal are sometimes used in place of CP
Configuration.
Table 224 describes the fields on the CP Summary page.
Field Description
Configuration Shows the captive portal ID and name. To access the configuration page for an exiting CP, click
the configuration name.
Mode Shows whether the CP is enabled.
Protocol Indicates whether the portal uses HTTP or HTTPS.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 251: Captive Portal Summary

Table 224: Captive Portal Summary

D-Link Unified Access System
Captive Portal Configuration Page 361