Adding Mac Filters; Modifying Mac Filters; Deleting Mac Filters; Mac Filter Summary - D-Link DWS-4026 User Manual

Software User Manual D-Link Unified Access System
12/10/09

Adding MAC Filters

1 To add a MAC filter, select Create Filter from the MAC Filter drop-down menu.
2 Enter a valid MAC address and select a VLAN ID from the drop-down menu.
The VLAN ID drop-down menu only lists VLANs currently configured on the system.
3 Select one or more ports to include in the filter. Use CTRL + click to select multiple ports.
4 Click Submit to apply the changes to the system.

Modifying MAC Filters

To change the port mask(s) for an existing filter, select the entry from the MAC Filter field, and then click (or CTRL + click)
the port(s) to include in the filter. Only those ports that are highlighted when you click Submit are included in the filter.
To change the MAC address or VLAN associated with a filter, you must delete and re-create the filter.

Deleting MAC Filters

To delete a filter, select it from the MAC Filter drop-down menu and click Delete. To delete all configured filters from the
forwarding database, click Delete All.
MAC F S
ILTER UMMARY
Use the MAC Filter Summary page to associate a MAC address with a VLAN and one or more source ports.
To access the MAC Filter Summary page, click LAN > Monitoring > Filters >MAC Filter Summary in the navigation tree.

Figure 126: MAC Filter Summary

C GARP
ONFIGURING
Generic Attribute Registration Protocol (GARP) is a general-purpose protocol that registers any network connectivity or
membership-style information. GARP defines a set of switches interested in a given network attribute, such as VLAN or
multicast address.
The GARP VLAN Registration Protocol (GVRP) provides a mechanism that allows networking switches to dynamically
register (and de-register) VLAN membership information with the networking devices attached to the same segment, and
for that information to be disseminated across all networking switches in the bridged LAN that support GMRP.
Document 34CSFP6XXUWS-SWUM100-D7

Configuring GARP

Page 203