Viewing Switch Associated Client Status; Viewing Associated Client Statistics; Figure 328: Switch Associated Client Status; Table 303: Vap Associated Client Status - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
BSSID
SSID
AP MAC Address
Location
Radio
Client MAC Address
Client IP Address

Viewing Switch Associated Client Status

The WLAN > Monitoring > Client > Associated Clients > Switch Status tab displays the Switch Associated Client
Status page which shows information about the switch that manages the AP to which the client is associated.
To disconnect a client from an AP, select the box next to the switch IP address, and then click Disassociate.
Field
Switch IP Address
Client MAC Address

Viewing Associated Client Statistics

A wireless client can roam among APs without interruption in WLAN service. The Unified Switch tracks the traffic the client
sends and receives during the entire wireless session while the client roams among APs that the switch manages. The
switch stores statistics about client traffic while it is associated with a single AP as well as throughout the roaming session.
The statistics on the WLAN > Monitoring > Client > Associated Clients > Statistics > Association Summary displays
the Associated Client Statistics page. This page shows information about the traffic a wireless client receives and
transmits while it is associated with a single AP.
Page 482 Monitoring Status and Statistics

Table 303: VAP Associated Client Status

Description
Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.
Indicates the SSID for the managed AP VAP where this client is associated.
This field indicates the base AP Ethernet MAC address for the managed AP.
The descriptive location configured for the managed AP.
Displays the managed AP radio interface the client is associated to and its configured mode.
The Ethernet address of the client station.
The IP address of the client station.

Figure 328: Switch Associated Client Status

Table 304: Switch Associated Client Status

Description
Shows the IP address of the switch that manages the AP to which the client is associated.
Shows the MAC address of the associated client.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09