Vrrp Interface Tracking Configuration; Figure 219: Vrrp Interface Tracking Configuration; Table 198: Vrrp Interface Tracking Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09

VRRP Interface Tracking Configuration

Use VRRP Interface Tracking to track a specific interface IP state within the router that can alter the priority level of a virtual
router for a VRRP group. An exception to this is, if that VRRP group is the IP address owner, its priority is fixed at 255 and
cannot be reduced through the tracking process.
To display the page, click LAN > L3 Features > VRRP > Virtual Router Configuration in the navigation tree, then click the
Track Interface button.
Field
Slot/Port
Virtual Router ID
S. No
Tracking Interface
Priority Decrement
Interface State
Remove
• Click Add to proceed to the VRRP Interface Tracking page.
• Click Submit to apply the new configuration. Configuration changes take effect immediately. These changes will not be
retained across a power cycle unless a Save configuration is performed.
• Click Refresh to refresh the page with the most current data from the switch.
• Click Cancel to return to the Virtual Router Configuration page.
Document 34CSFP6XXUWS-SWUM100-D7

Figure 219: VRRP Interface Tracking Configuration

Table 198: VRRP Interface Tracking Configuration Fields

Description
The interface associated with the Virtual Router ID.
The Virtual Router ID for which data is to be displayed.
The serial number for this row.
The Tracked Interface for which data is to be displayed.
The priority decrement for the tracked interface. The valid range is 1 to 254. The
default value is 10.
The IP state of the tracked interface.
Removes the selected Tracking Interface from the VRRP tracked list.
D-Link Unified Access System
Virtual Router Redundancy Protocol (VRRP) Page 315