Trap Log; Figure 83: Trap Log; Table 68: Trap Log Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
T L
RAP OG
Use the Trap Log page to view the entries in the trap log. For information about how to copy the file to a TFTP server, see
"Upload File From Switch (TFTP)" on page
To access the Trap Log page, click LAN > Monitoring > Log > Trap Log in the navigation menu.
Field
Number of Traps Since Last
Reset
Trap Log Capacity
Number of Traps Since Log
Last Viewed
Log
System Up Time
Trap
• Click Clear Log to clear all entries in the log. Subsequent displays of the log will only show new log entries.
Document 34CSFP6XXUWS-SWUM100-D7
145.

Figure 83: Trap Log

Table 68: Trap Log Fields

Description
The number of traps generated since the trap log entries were last cleared.
The maximum number of traps stored in the log. If the number of traps exceeds the
capacity, the entries will overwrite the oldest entries.
The number of traps that have occurred since the traps were last displayed. Displaying
the traps by any method (terminal interface display, Web display, upload file from
switch, etc.) will cause this counter to be cleared to 0.
The sequence number of this trap.
The time at which this trap occurred, expressed in days, hours, minutes and seconds
since the last reboot of the switch.
Displays the information identifying the trap.
D-Link Unified Access System
Using System Utilities Page 151