Adding A Port Mirroring Session; Figure 56: Multiple Port Mirroring; Figure 57: Multiple Port Mirroring-Add Source Ports; Table 46: Multiple Port Mirroring Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
The packet that is copied to the destination port is in the same format as the original packet on the wire. This means that if
the mirror is copying a received packet, the copied packet is VLAN tagged or untagged as it was received on the source port.
If the mirror is copying a transmitted packet, the copied packet is VLAN tagged or untagged as it is being transmitted on the
source port.
Use the Multiple Port Mirroring page to define port mirroring sessions.
To access the Multiple Port Mirroring page, click LAN > Administration > Multiple Port Mirroring in the navigation menu.
Field
Session
Mode
Source Port
Destination Port

Adding a Port Mirroring Session

A Port will be removed from a VLAN or LAG when it becomes a destination mirror.
1 From the Port Mirroring page, click Add Source Port to display the Add Source Port page.
Page 116 Multiple Port Mirroring

Figure 56: Multiple Port Mirroring

Table 46: Multiple Port Mirroring Fields

Description
Specifies the monitoring session.
Enables you to turn on of off Multiple Port Mirroring. The default is Disabled (off).
Lists the source ports that have been added from the Add Source Port page.
Select the port to which port traffic may be copied.
Figure 57: Multiple Port Mirroring—Add Source Ports
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09