Adjusting The Channel And Power; Figure 310: Managed Ap Debug; Table 274: Managed Ap Debug - D-Link DWS-4026 User Manual

D-Link Unified Access System
The fields in Table 274 on page 450
page.
Field
MAC Address
Location
IP Address
Status
Password
Confirm Password
Enable Debug

Adjusting the Channel and Power

Changes you make to the channel and power are runtime changes only. If you change the channel or power settings, the
new settings are lost if the AP or switch is reset.
The fields in Table 275 on page 451
AP Advanced page.
Page 450 AP Management
appear when you click the Debug link for a managed AP on the Managed AP Advanced

Figure 310: Managed AP Debug

Table 274: Managed AP Debug

Description
Shows the MAC address of the access point.
Shows the location of the access point, as configured in the Valid AP database.
Shows the IP address of the AP.
Shows the debug status, which can be one of the following:
• None: Debugging has not been enabled or disabled.
• Set Requested: A request has been made to change the debug status.
• Set Complete: Debugging has been enabled or disabled.
Enter the admin password for the AP (the default is admin).
Since the password is encrypted, you must retype the password to confirm the password.
Select or clear the Enable check box to enable or disable debugging.
Once once you Telnet to the AP, you get an AP interface login prompt. The user name is
admin. Enter the password you set in the previous field. The default password is admin if you
did not specify a new password. From the AP CLI, you can also access the standard Linux
prompt by typing the '!' character.
You can issue the following debug commands at the Linux OS prompt:
• get management: Display management interface information
• get managed-ap: Display managed AP information
You can issue the following debug commands at the Linux OS prompt:
• ifconfig: display all interfaces.
• cat /proc/meminfo: View memory utilization
appear when you click the current channel or power setting for an AP on the Managed
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09