Figure 294: Radio Settings; Table 260: Radio Settings - D-Link DWS-4026 User Manual

D-Link Unified Access System
The following table describes the fields you can configure from the Radio tab on the Basic Setup page. To change the
settings on this page, you must first select the radio you want to configure (1 or 2). After you change the settings, click
Submit to apply the settings. Changes to the settings apply only to the selected radio.
Field
1-802.11b/g/n
2-802.11a/n
State
Page 418 Basic Setup

Figure 294: Radio Settings

Table 260: Radio Settings

Description
From this field, you can select the radio that you want to configure. By default, Radio 1
operates in IEEE 802.11a/n mode, and Radio 2 operates in IEEE 802.11b/g/n mode. If you
change the mode, the labels for the radios change accordingly. Changes to the settings apply
only to the selected radio.
Specify whether you want the radio on or off by clicking On or Off.
If you turn off a radio, the AP sends disassociation frames to all the wireless clients it is
currently supporting so that the radio can be gracefully shutdown and the clients can start the
association process with other available APs.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09