Managing Ip Subnet-Based Vlans; Configuration; Figure 120: Ip Subnet-Based Vlan Configuration; Table 104: Ip Subnet-Based Vlan Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
M IP S
ANAGING
If a packet is untagged or priority- tagged, the device associates the packet with any matching IP subnet classification. If no
IP subnet classification can be made, then the packet is subjected to the normal VLAN classification rules of the device. An
IP subnet-to-VLAN mapping is defined by configuring an entry in the IP subnet-to-VLAN table. An entry is specified by a
source IP address, network mask, and the desired VLAN ID. The IP subnet-to-VLAN configurations are shared across all
ports of the switch.
C
ONFIGURATION
Use the IP Subnet-based VLAN Configuration page to assign an IP Subnet to a VLAN.
To display the IP Subnet-based VLAN Configuration page, click LAN > L2 Features > VLAN > IP Subnet-based VLAN in
the navigation menu.
Field
IP Address
IP Address
Subnet Mask
VLAN ID
• If you make any changes on this page, click Submit to apply the changes to the system.
• To delete an existing binding, select the source IP address from the IP Address drop-down menu, and then click
Delete.
Document 34CSFP6XXUWS-SWUM100-D7
-B VLAN
UBNET ASED

Figure 120: IP Subnet-based VLAN Configuration

Table 104: IP Subnet-based VLAN Configuration Fields

Description
Select the IP address of the IP-to-VLAN binding to view or delete, or select Add to
create a new binding.
Specifies packet source IP address. This field is configurable only when you create a
new IP Subnet-based VLAN. Enter the IP address in dotted decimal notation.
Specifies packet source IP subnet mask address.This field is configurable only when
you create a new IP Subnet-based VLAN. Enter the subnet mask in dotted decimal
notation.
Specifies the VLAN to which the IP address is assigned. The valid range is 1-3965.
D-Link Unified Access System
S

Managing IP Subnet-Based VLANs

Page 197