Figure 10: System Description; Table 5: System Description Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
System Description
System Name
System Location
System Contact
IP Address
System Object ID
System Time (yyyy-
mm-dd h:m:s)
System Up Time
Current SNTP
Synchronized Time
Document 34CSFP6XXUWS-SWUM100-D7

Figure 10: System Description

Table 5: System Description Fields

Description
The product name of this switch.
Enter the name you want to use to identify this switch. You may use up to 31 alpha-numeric
characters. The factory default is blank.
Enter the location of this switch. You may use up to 31 alpha-numeric characters. The factory
default is blank.
Enter the contact person for this switch. You may use up to 31 alpha-numeric characters. The
factory default is blank.
The IP Address assigned to the network interface. To change the IP address, see
on page 65.
The base object ID for the switch's enterprise MIB.
Enter the current date and time that the switch will follow using the on-board real-time clock.
Displays the number of days, hours, and minutes since the last system restart.
Displays currently synchronized SNTP time in UTC. If no SNTP server has been configured
and the time is not synchronized, this field displays "Not Synchronized." To specify an SNTP
server, see "Configuring SNTP Settings" on page
D-Link Unified Access System
166.
System Description
"Serial Port"
Page 59