Xmodem (Via The Console Cable) - 3Com 3CR17561-91-US - Switch 4500 26PORT Managed 24 10/100 2 Gbe Stackable RJ45 Getting Started Manual

3 Enter quit to exit.
XModem (via the
console cable)
1 From the User View, enter:
2 Enter y to display the following message:
3 As the file is downloading, start the XModem send file process with
4 Repeat steps 1 to 3 for each of the remaining files.
200 PORT command successful.
150 Opening ASCII mode data connection for
vrpcfg.def(10986 bytes).......226 Transfer complete.
FTP: 10986 byte(s) received in 8.046 second(s) 1000.00
byte(s)/sec.
To upgrade software to your Switch via XModem do the following:
xmodem get unit1>flash:/3ComOScfg.def
The following information is displayed:
**** WARNING ****
xmodem is a slow transfer protocol limited to the
current speed
settings of the auxiliary ports.
During the course of the download no exec input/output
will be available!
Proceed?[Y/N]y
Destination filename [unit1>flash:/vrpcfg.def]?
Before pressing ENTER you must choose 'YES' or
'NO'[Y/N]:
Download with XMODEM protocol...
...C..
terminal emulation software, such as Microsoft Hyperterminal.
When the file download is complete the message Download
successful! is displayed.
Upgrading from the Command Line Interface 81