Configure Authentication Lists - NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
The TACACS+ Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Click the Delete button.
The TACACS+ server is removed.

Configure Authentication Lists

You can configure a default login list. A login list specifies one or more authentication
methods to validate switch or port access for the admin user.
Note: The admin user is assigned to a preconfigured list that is named
defaultList and that you cannot delete.
Configure an HTTP Authentication List
You can configure the default HTTP login list.
To change the HTTP authentication method for the default list:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > Authentication List > HTTP Authentication
List.
6. Select the check box next to the httpList name.
7. From the menu in the 1 column, select the authentication method that must be used first in
the selected authentication login list.
Manage Device Security 223 User Manual