Clear Ip Route All; Show Ip Brief - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip mtu
This command resets the ip mtu to the default value.
Format
no ip mtu <mtu>
Mode Interface Config
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be ethernet or snap.
Default ethernet
Format
encapsulation {ethernet | snap}
Mode Interface Config
Note: Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.

clear ip route all

This command removes all the route entries learned over the network.
Format
clear ip route all
Mode Privileged EXEC
Protocol Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number The total number of routes.
of Routes

show ip brief

This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-13