Show Ip Route Bestroutes; Show Ip Route Entry - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
For each Next Hop
Next Hop Intf
Next Hop IP
Address

14.2.15 show ip route bestroutes

This command causes the entire route table to be displayed. This commands takes no
options.
Format
Mode
Network Address
Subnet Mask
Protocol
Total Number of
Routes
The following information displays for each Next Hop.
Next Hop Intf
Next Hop IP
Address

14.2.16 show ip route entry

This command displays the entire route table.
Format
Mode
Routing Commands
The outgoing router interface to use when forwarding traffic
to the next destination.
The outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
show ip route bestroutes
Privileged EXEC
Is an IP route prefix for the destination.
Is a mask of the network and host portion of the IP address
for the specified interface.
Tells which protocol added the specified route. The possibili-
ties are: local, static, OSPF or RIP.
The total number of routes in the route table.
The outgoing router interface to use when forwarding traffic
to the next destination.
The outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
The next router will always be one of the adjacent neighbors
or the IP address of the local interface for a directly attached
network.
show ip route entry
Privileged EXEC
v4.1, October 2008
14-15