Show Bridge Address-Table Static - Dell PowerConnect 6024F Command Line Interface Reference Manual

Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
vlan mac address port
---- -------------- ----- -----
1 0060.704C.73FF g8 dynamic
1 0060.708C.73FF g8 dynamic
200 0010.0D48.37FF g8 static

show bridge address-table static

The show bridge address-table static privileged EXEC command displays statically created entries
in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-
number]
• vlan—Specific valid VLAN, such as VLAN 1.
• interface—A valid Ethernet port.
• port-channel-number—A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
96
Address Table Commands
type