Show Bridge Address-Table Static - Dell PowerConnect 3524 Cli Reference Manual

Example
The following example displays all classes of entries in the bridge-forwarding database.
Console# show bridge address-table
Aging time is 300 sec
Vlan
---------
1
1
200

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays statically created entries
in the bridge-forwarding database.
Syntax
• show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port number.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
mac address
--------------
00:60:70:4C:73:FF
00:60:70:8C:73:FF
00:10:0D:48:37:FF
Port Type
---- -------
5/e8 dynamic
5/e8 dynamic
5/e9 static
Address Table Commands
113