Show Ip Ospf Virtual-Links - Dell PowerConnect 6024F Command Line Interface Reference Manual

It is...
Redistributing External
Routes from
Number of areas

show ip ospf virtual-links

The show ip ospf virtual-links user EXEC command displays parameters and the current state of
OSPF virtual links.
Syntax
show ip ospf virtual-links [area area-id] [router router-id]
• area-id—Area associated with the OSPF address range. It is specified as an IP address.
• router-id—Router ID associated with the virtual link neighbor.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Possible types are internal, area border, or autonomous system boundary.
Lists redistributed routes, by protocol.
Number of areas in router, area addresses, etc.
253
OSPF Commands