Show Radius-Servers - Dell PowerConnect 6024F Command Line Interface Reference Manual

• deadtime—Length of time in minutes, for which a RADIUS server is skipped over by
transaction requests. (Range: 0 - 2000)
Default Configuration
The default dead time is 0 minutes.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a dead time where a RADIUS server is skipped over by transaction
requests for this period, to 10 minutes.
Console (config)# radius-server deadtime 10

show radius-servers

The show radius-servers user EXEC command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
321
Radius Commands