Dell PowerConnect 6024F Command Line Interface Reference Manual page 352

Examples
The following example sets the scalar MIB "sysName" to have the value "dell".
Console (config)# snmp-server set sysName sysname dell
The following example sets the entry MIB "rndCommunityTable" with keys 0.0.0.0 and "public".
The field rndCommunityAccess gets the value "super" and the rest of the fields get their default
values.
Console (config)# snmp-server set rndCommunityTable
rndCommunityMngStationAddr 0.0.0.0 rndCommunityString public
rndCommunityAccess super
snmp-server view
The snmp-server view global configuration command creates or updates a Simple Network
Management Protocol (SNMP) server view entry. To delete a specified SNMP server view entry, use
the no form of this command.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name [oid-tree]
• view-name—Specifies the label for the view record that is being created or updated. The
name is used to reference the record. (Range: 1-30 characters)
• oid-tree—Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4.
• included—Indicates that the view type is included.
• excluded—Indicates that the view type is excluded.
Default Configuration
All views are included by default.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The number of views is limited to 64.
352
SNMP Commands