Sntp Unicast Client Enable - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
Syntax
sntp client enable
no sntp client enable
Default Configuration
Client is disabled on an interface.
Command Mode
Interface Configuration (Ethernet, port-channel, VLAN) mode
User Guidelines
Use the sntp broadcast client enable global configuration command to enable Broadcast
clients globally.
Use the sntp anycast client enable global configuration command to enable Anycast clients
globally.
Examples
The following example enables SNTP Broadcast and Anycast clients on the interface.
Console(config-if)# sntp client enable
sntp unicast client enable
The sntp unicast client enable global configuration command enables clients to use Simple
Network Time Protocol (SNTP) predefined Unicast clients. To disable SNTP Unicast clients, use
the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast clients are disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
108
Clock
Advertisement
Table of Contents
