•
seconds—Length of time (in seconds) that the key is valid to be sent.
(Range: 1 - 4294967295)
Default Configuration
There is no time limit, the key is always valid to be sent.
Command Mode
Key configuration
User Guidelines
If the last key expires, authentication stops and an error message is generated.
Example
The following example specifies for key 1, a send-lifetime range from 14:00:00 Jan 25 2005 for
3600 seconds, and for key 2 a send-lifetime range from 15:00:00 Jan 25 2005 for 3600 seconds.
Console (config)# key 1
Console (config-key)# key-string mountain
Console (config-key)# send-lifetime 14:00:00 Jan 25 2005 duration
3600
Console (config-key)# exit
Console (config)# key 2
Console (config-key)# key-string country
Console (config-key)# send-lifetime 15:00:00 Jan 25 2005 duration
3600
ip maximum-paths
The ip maximum-paths global configuration command defines the maximum number of parallel
routes. To restore the default number of parallel routes, use the no form of this command.
Syntax
ip maximum-paths number-paths
no ip maximum-paths
•
number-paths—Maximum number of parallel routes installed in a routing table.
(Range: 1 - 4)
Default Configuration
The default number of parallel routes is 4.
190
IP Routing Protocol-Independent Commands