Tacacs+ Commands; User Interface Commands - Dell PowerConnect 6024F Command Line Interface Reference Manual

traceroute
telnet
resume

TACACS+ Commands

Command Group
tacacs-server host
tacacs-server key
tacacs-server source-ip
tacacs-server timeout
show tacacs

User Interface Commands

Command Group
enable
disable
login
exit(configuration)
exit(EXEC)
end
help
history
history size
debug-mode
show history
show privilege
Discovers the IP routes that packets actually take when travelling to
their destinations.
Logs into a host that supports Telnet.
Switches to another open Telnet session.
Description
Specifies a TACACS+ server host.
Sets the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon.
Specifies the source IP address used for communication with
TACACS+ servers.
Sets the interval for which the switch waits for a server host to reply.
Displays TACACS+ server settings and statistics.
Description
Enters the privileged EXEC mode.
Returns to User EXEC mode.
Changes a login username.
Exits any configuration mode to the previously highest mode in the
CLI mode hierarchy.
Closes an active terminal session by logging off the device.
Ends the current configuration session and returns to the previous
command mode.
Displays a brief description of the help system.
Enables the command history function.
Changes the command history buffer size for a particular line.
Switches the mode to debug.
Lists the commands entered in the current session.
Displays the current privilege level.
UE
UE
UE
Mode
GC
GC
GC
GC
PE
Mode
UE
PE
UE
(All)
UE
GC
(All)
LC
LC
PE
UE
UE
45
Command Groups