Show Bridge Address-Table Static - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
• Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer
3 interface) are presented in the VLAN column by a port number and not by a VLAN ID.
• "Special" MAC addresses that were not statically defined or dynamically learned are displayed
in the MAC address table. This includes, for example, MAC addresses defined in ACLs.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
interface
---------
1
1
200

show bridge address-table static

The show bridge address-table static Privileged EXEC mode command displays statically
created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-
number]
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
110
Address Table Commands
mac address
--------------
00:60:70:4C:73:FF
00:60:70:8C:73:FF
00:10:0D:48:37:FF
Port Type
---- -------
5/e8 dynamic
5/e8 dynamic
5/e9 static