Example
In this example, all static entries in the bridge-forwarding database are displayed.
Console# show bridge address-table static
Aging time is 300 sec
vlan
mac address
----
--------------
1
00.60.70.4C.73.FF g8
1
00.60.70.8C.73.FF g8
200
00.10.0D.48.37.FF g9
show bridge multicast address-table
The show bridge multicast address-table privileged EXEC command displays Multicast MAC
address table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-
multicast-address] [format ip | mac]
•
vlan_id—A VLAN ID value.
•
mac-multicast-address—A MAC Multicast address.
ip- multicast-address—An IP Multicast address.
•
•
format—Multicast address format. Can be ip or mac. If format is unspecified, the default
is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
port
type
----- -----
permanent
delete-on-timeout
delete-on-reset
Address Table Commands
97