Lacp Commands; Lacp System-Priority; Lacp Port-Priority - Dell PowerConnect 6024F Command Line Interface Reference Manual

LACP Commands

lacp system-priority

The lacp system-priority global configuration command configures the system priority. To reset to
default, use the no form of this command.
Syntax
lacp system-priority value
no lacp system-priority
• value—Value of the priority. (Range: 1 - 65535)
Default Configuration
The default system priority value is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
Console (config)# lacp system-priority 120

lacp port-priority

The lacp port-priority interface configuration command configures the priority value for physical
ports. To reset to default priority value, use the no form of this command.
Syntax
lacp port-priority value
no lacp port-priority
• value—Port priority value. (Range: 1 - 65535)
Default Configuration
The default port priority value is 1.
197
LACP Commands