Username - Dell PowerConnect 6024F Command Line Interface Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
If an encrypted password is specified on a line, the range of the password length changes to 1-
32 characters.
Example
The following example defines local level 15 password "dell" to control access to user and privilege
levels.
Console (config)# enable password level 15 dell

username

The username global configuration command establishes a username-based authentication system.
To remove a user name use the no form of this command.
Syntax
username name [password password] [privilege level] [encrypted]
no username
• name—The name of the user.
• password—The authentication password for the user, from 1 to 159 characters in length.
• level—The user level (Range: 1 -15).
• encrypted—Encrypted password entered, copied from another device configuration.
Default Configuration
No user name is defined.
The default privilege level is 1.
Command Mode
Global Configuration mode
User Guidelines
If an encrypted password is specified on a line, the range of the password length changes to 1-
32 characters.
64
AAA Commands