Ospf Commands; Router Ospf Enable; Router Ospf Area - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
OSPF Commands
router ospf enable
The router ospf enable global configuration command enables the OSPF routing process. To
disable the OSPF routing process, use the no form of this command.
Syntax
router ospf enable
no router ospf enable
Default Configuration
The OSPF routing process is disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the OSPF routing process.
Console (config)# router ospf enable
router ospf area
The router ospf area global configuration command defines an OSPF area. To remove the
definition, use the no form of this command.
Syntax
router ospf area area-id
no router ospf area area-id
•
area-id—OSPF area associated with a range of IP addresses. The area-id is specified in a
dotted decimal notation similar to an IP address.
Default Configuration
OSPF area 0.0.0.0 is the default, if no area is specified.
Command Mode
Global Configuration mode
233
OSPF Commands
Advertisement
Table of Contents
