Dell PowerConnect 6024F Command Line Interface Reference Manual page 366
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
User Guidelines
A user and notification view are not automatically created. Use the snmp-server user, snmp-
server group and snmp-server user global configuration commands to generate a user, group
and notify group, respectively.
To define an SNMP recipient on the out-of-band port, use the out-of-band IP address format
oob/ip-address.
NOTE:
configured.
Example
The following example configures an SNMPv3 host.
Console (config)# snmp-server v3-host 192.168.0.20 john
show snmp engineID
The show snmp engineID privileged EXEC command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Console # show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
366
SNMP Commands
The type of trap (i.e trap, notification or inform) depends on how the trap receiver has been
Advertisement
Table of Contents
