Key-String - Dell PowerConnect 6024F Command Line Interface Reference Manual

Default Configuration
By default, there are no keys.
Command Mode
SSH Public Key Chain Configuration mode
User Guidelines
Follow this command with the key-string command to specify the key.
Example
The following example enables a SSH public key to be manually configured for the SSH public key
chain called "bob".
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)# user-key bob rsa
Console(config-pubkey-key)#

key-string

To specify the authentication string for a key, use the key-string key configuration command. To
remove the authentication string, use the no form of this command.
Syntax
key-string text
no key-string
• text-Authentication string that must be sent and received in the packets using the
routing protocol being authenticated. The string can contain 1 to 16 characters.
Default Configuration
By default, the key-string is empty.
Command Mode
Key configuration
User Guidelines
There are no user guidelines for this command.
405
SSH Commands