Dell PowerConnect 6024F Command Line Interface Reference Manual page 225

Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays DVMRP neighbor information for port g1.
Console# show ip dvmrp neighbor ethernet g1
Inter- Neighbor
face
------ ----------- --------- ------- ------- ----------- -----
eth g1 192.168.1.28 20:20:00
eth g1 192.168.1.10 20:20:00
eth g2 192.168.1.28 20:20:00
eth g2 192.168.1.89 20:20:00
The following example displays DVMRP interfaces.
Console# show ip dvmrp neighbor
Inter- Neighbor
face
------ ----------- --------- ------- ------- ---------
eth g2 192.168.1.28 20:20:00
eth g2 192.168.1.10 20:20:00
Up Time Expiry
Time
0:02:55 3.255
0:02:55 3.255
0:02:55 3.255
0:02:55 3.255
Up Time Expiry
Time
0:02:55 3.255
0:02:55 3.255
Version Capabilities State
L,P,G,M
L,P,G,M
L,P,G,M
L,P,G,M
Version Capabilities State
L,P,G,M
L,P,G,M
Multicast Routing Commands
Active
Active
Active
Active
-----
Active
Active
225