Dell PowerConnect 6024F Command Line Interface Reference Manual page 220

Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays all ip mroutes.
Console# show ip mroute
Group
----------- -----------------
224.0.255.1
224.0.255.1
224.1.255.1
224.1.255.1
224.8.255.1
224.8.255.1
224.8.255.1
224.9.255.1
The following example displays all ip mroutes for source at IP address 192.92.37.100.
Console# show ip mroute source 198.92.37.100
Group
---------------------------------------------- --------------------
224.0.255.1
224.1.255.1
220
Multicast Routing Commands
Source Upstream
------------ -----------
198.92.37.100/32 10.20.37.33
199.92.37.100/32 10.20.37.33
198.92.37.100/32 10.20.37.33
199.92.37.100/32 10.20.37.33
179.82.17.200/32 10.20.37.33
179.82.17.200/32 10.20.37.33
179.82.17.200/32 10.20.37.33
179.82.17.200/32 10.20.37.33
Source Upstream
198.92.37.100/32 10.20.37.33
198.92.37.100/32 10.20.37.33
Interface Up Time Owner
--------- --------
eth g1 20:20:00
eth g1 1d:4h:20m dvmrp
eth g1 21:20:00
eth g1 1d:5h:20m dvmrp
vlan127 1w:1d:2h
vlan128 3m:2w:2d
vlan129 1y:2m:2w
p-c 7 1d:5h:20m
Interface Up Time Expiry Time Owner
eth g1 20:20:00
eth g1 21:20:00
dvmrp
dvmrp
dvmrp
dvmrp
dvmrp
dvmrp
0:02:55 dvmrp
0:02:55 dvmrp