Dell PowerConnect 6024F Command Line Interface Reference Manual page 37

Command line interface (cli) guide (.htm)
Hide thumbs Also See for PowerConnect 6024F:
Table of Contents

Advertisement

router ospf redistribute
connected
router ospf area virtual-link
hello-interval
dead-interval
retransmit-interval
transmit-delay
authentication
router ospf router-id
router ospf area stub
router ospf area default-cost
ospf
ospf enable
ospf area
ospf cost
ospf priority
ospf hello-interval
ospf dead-interval
ospf retransmit-interval
ospf transmit-delay
ospf authentication
clear ip ospf process
show ip ospf
show ip ospf virtual-links
Enables advertisements of directly connected networks routes, running
OSPF.
Defines an OSPF virtual link and enters the OSPF Virtual-link
Configuration mode.
Specifies the interval between hello packets that the software sends on
the OSPF virtual link interface.
Sets the interval at which hello packets must not be seen before its
neighbors declare the router down.
Specifies the time between LSA retransmissions for adjacencies
belonging to the OSPF virtual link interface.
Sets the estimated time required to send a link-state update packet on
the OSPF virtual link interface.
Enables authentication for OSPF packets and specifies the type of
authentication.
Configures an OSPF router ID.
Defines an area as a stub area.
Specifies a cost for the default summary route sent into a stub area.
Creates OSPF routing process on an interface.
Activates OSPF on an interface.
Defines an interface area ID.
Specifies the cost of sending a packet on an interface.
Sets the router priority, which determines the designated router for the
network.
Specifies the interval between hello packets the software sends on an
interface.
Sets the interval at which hello packets must not be seen before
neighbors declare the router down.
Specifies the time between LSA retransmissions for interface
adjacencies.
Sets the estimated time required to send a link-state update packet on
an interface.
Enables authentication for OSPF packets and specifies the
authentication type.
Clears redistribution based on OSPF routing.
Displays general OSPF routing information.
Displays parameters and the current state of OSPF virtual links.
GC
GC
OV
OV
OV
OV
OV
GC
GC
GC
IC
IC
IC
IC
IC
IC
IC
IC
IC
IC
PE
UE
UE
37
Command Groups

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 6024

Table of Contents