Dell PowerConnect 6024F Command Line Interface Reference Manual page 26

Line
Management ACL
Multicast Routing
OSPF
PHY Diagnostics
Port Channel
Port Monitor
QoS
RADIUS
RIP
RMON
SNMP
Spanning Tree
SSH
Syslog Commands
System Management
TACACS+
User Interface
VLAN
VRRP
Web Server
802.1x
NOTE:
EXEC Mode), PE (Privileged EXEC Mode), GC (Global Configuration Mode), IC (Interface Configuration
Mode), LC (Line Configuration) MA (Management Access-level), KC (Key Chain), KE (Key), VC (VLAN
Configuration), ML (MAC-List Configuration), MT (MAC-acl), SP (SSH Public Key), SK (SSH Public Key-
chain), PM (Policy Map Configuration), OV (OSPF Virtual Link), IP (IP Access List Configuration) and MC
(MST Configuration Mode).
26
Command Groups
Configures the console and remote Telnet connection.
Configures and displays management access-list information.
Configures Multicast routing.
Configures and manages OSPF on the device.
Diagnoses and displays the interface status.
Configures and displays Port channel information.
Monitors activity on specific target ports.
Configures and displays QoS information.
Configures and displays RADIUS information.
Configures RIP .
Displays RMON statistics.
Configures SNMP communities, traps and displays SNMP information.
Configures and reports on Spanning Tree protocol.
Configures SSH authentication.
Manages and displays syslog messages.
Configures the device clock, name and authorized users.
Configures and displays TACACS+ information.
Describes user commands used for entering CLI commands.
Configures VLANs and displays VLAN information.
Configures and manages VRRP on the device.
Configures Web based access to the device.
Configures commands related to 802.1x security protocol
The access mode shown in the following tables is indicated by these abbreviations: UE (User