Interface Out-Of-Band-Eth - Dell PowerConnect 6024F Command Line Interface Reference Manual

Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each active
interface in the range. If the command returns an error on one of the active interfaces, it does
not stop executing commands on other active interfaces.
Example
The following example shows how ports g18 to g20 and ports g22 to g24 are grouped to receive the
same command.
Console(config)# interface range ethernet g18-20, g22-24
Console(config-if)#

interface out-of-band-eth

The interface out-of-band-eth global configuration command configures the Out-of-Band
Ethernet port and enter interface configuration mode.
interface out-of-band-eth [interface]
• interface—Interface number. If unspecified defaults to 1.
Default Configuration
The interface is enabled.
Command Mode
Global Configuration mode
User Guidelines
The following commands are available on interface Out-of-Band-eth mode:
shutdown, description, speed, duplex, negotiation, flowcontrol, ip
Examples
The following example enters Out-of-Band Ethernet interface configuration mode.
Console(config)# interface out-of-band-eth
Console(config-oob)#
130
Ethernet Configuration Commands