Show Interfaces Port-Channel - Dell PowerConnect 6024F Command Line Interface Reference Manual

members of the aggregated link to half-duplex operation, and may, as per the standard, set
them all to Inactive.
Example
The following example shows how port g5 is configured to port-channel number 1 without LACP.
Console (config)# interface ethernet g5
Console (config-if)# channel-group 1 mode on

show interfaces port-channel

The show interfaces port-channel user EXEC command displays port-channel information (which
ports are members of that port-channel, and whether they are currently active or not).
Syntax
show interfaces port-channel [port-channel-number]
• port-channel-number—Valid port-channel number information to display.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how all port-channel information is displayed.
Console (config)# show interfaces port-channel
Channel
------------
Ch 1
Ch 2
Ch 3
Ports
------
Active g1, g2
Active g2
Inactive g8
Inactive g3
Port Channel Commands
279